Silk screen printing squeegee/rubber squeegee/Squeegee
Squeegees are an essential tool for screen printing, probably the most important piece of equipment besides the actual screen! Shanghai SRING cooperated factory is established in 1988, with nearly 20 years experience.
A brief description of polyurethane squeegee blade/PU squeegee blade for silk screen printing
Polyurethane squeegee blade/pu squeegee blade for silk screen printing is used to force the inks through the screen and help achieve an even print, it is important factors in getting sharp, clear Prints.
Polyurethane squeegee blade/pu squeegee blade for silk screen printing will control ink flow through fine, detaile stencils increasing resolution and overall print quality.
Hardness Selections
Red, Soft
PU1-PU4 |
Suitable for low viscosity ink printing, low density or tough surface printing. |
Green, Medium
PU5-PU6 |
High pressure resistance. Suitable for high or low viscosity ink or high density surface printing. Could easily control the ink amount and assure the precision of the printing. |
Blue, Hard
PU7-PU10 |
Highest pressure and strongest ink solvent resistance. Could easily control the ink amount and get the highest quality printing. |
The water-based squeegee is widely used in screen printing on textile, decoration, unevenand rough surfaces.
It performs well in medium pressure, low counts mesh, and low viscosity ink.
Water-based bevel squeegee in aluminum handle:
Water resistance and strong durability in Aluminum Handle, commonly used in manual screen printing. 4inch-51inch.
Squeegee for Screen Printing Specification:
| Material |
TDI, MDI, PPG, PTMG,PUetc. |
| Color |
as requested |
| Hardness |
50-95(Shore A) |
| Density |
1.12-1.25g/cm3 |
| Tensile Strength |
25-55Mpa |
| Tear Strength |
85-155KN/M |
| Elongation |
450-650% |
| Impact Elasticity |
>20-30% |
| Tolerance |
0.1-0.3mm |
| Working Temperature |
120°C(max) |
| Surface Finish |
One side or both |
